Description
Your pump protection unit uses a microcomputer to continuously monitor power and line voltage to provide
protection against dry well conditions, waterlogged tank, high or low line voltage, and mud or sand
clogging. Indicator lights provide complete system status and are easily viewed without removing the
cover. A 3.7kW rated contactor is included with the unit. The control box provides large terminal blocks
and plenty of room for wiring, even when using 25mm wire. Our unique Snapshot calibration feature provides
simple, reliable push-button calibration.
■ Over/Underload Protection
■ Over/Under Voltage Protection
■ Rapid Cycle Detection
■ Fault Indicator Lights
■ Run Indicator Light
■ 3.7kW
■ Heavy Duty Terminal Blocks
■ Adjustable Automatic Restart Timer
■ Snapshot Calibration
■ Continuous Calibration Memory
■ Works With All Single Phase Motors
■ Transient Surge Protection
Pumptec Plus protects against:
Low yield bores, high and low voltages, rapid cycling, power surges, drop in water levels,
broken shaft or coupling, air or gas locking – cavitation, clogged bore screen, sand or mud clogging, faulty check valves.
Voltage: 230V /- 10%. Load: /- 25% of field calibrated setting.
